King Electric and Solar installs recessed lighting and upgrades existing fixtures to LED throughout Auburn, CA and the surrounding Placer County communities. Clean finishes, proper wiring, no guesswork.
Licensed, insured, and review-backed
8+
Cities Served Across the Region
6
Core Electrical and Solar Services
1
Local Team, No Franchise Dispatch
Recessed lighting changes how a room feels, but only when it's planned and wired correctly. Our licensed electricians at King Electric and Solar handle everything from layout planning to final trim installation. We serve homeowners and businesses across Auburn, Roseville, Rocklin, and the wider Placer County area.
Whether you're upgrading old cans to LED or installing recessed lights in a room that never had them, here's what we handle.
New recessed lighting installation in existing ceilings
LED retrofit conversions for older recessed fixtures
Dimmer switch installation compatible with LED bulbs
Lighting layout planning for kitchens, living rooms, and offices
Wiring runs for rooms without existing overhead lighting
Fixture selection guidance for color temperature and output
Safe attic and insulation work around new can installations
Recent customer feedback about recessed lighting & led upgrades services.
Amazing service! Super professional, easy to deal with, and the team is really personable and helpful. I called at the end of the day on the Friday before Memorial Day weekend, and JC showed up within literally 10…
Owner reply
Thank you so much Garrett, happy to get you up and running for the long weekend. Call if you ever need an electrician
Garrett Grice
2026-05-29
Upgraded batteries for my off grid home. Excellent service and install. Easy to work with and quick to respond to any needs.
Owner reply
Thanks so much Alisa, moving those 800lb batteries was a challenge. We look forward to being your solar provider of the…
Alisa
2026-07-03
Very good nice guys. They just didn't come at the time I had purposely set.
Owner reply
Judy, I am so sorry we were early to the appointment. Hopefully we make it up to you with a free membership and…
Judy Pinegar
2026-07-03
They upgraded our main panel and ran circuits for an ev charger, hot water heater and induction cooktop. Very thorough and courteous, communicated well.
Owner reply
Dee Dee, that was a good-sized project and we're glad it went smoothly. Getting the panel upgrade, EV charger, water…
Dee Dee Gunther
2026-06-23
High quality service!
Owner reply
Blake, glad it landed that way. That's what we're going for on every job.
Blake
2026-06-15
Great experience with King Electric and Solar! I had a fantastic experience working with the team at King Electric and Solar. Blake Mitchell** started things off by walking me through the entire project. He took the…
Owner reply
Phil, Thank you so much for your king words. You were a pleasure to work with and we look forward to being your local…
Phillip Sharp
2026-06-03
Recessed lighting projects move quickly when the planning is done right. Here's how we approach each job.
We look at your ceiling type, existing wiring, insulation, and attic access. This tells us what's possible and helps us map out fixture placement before any work starts.
We plan fixture spacing, confirm your panel has capacity for the load, and identify whether new circuits or dedicated runs are needed for the project.
Our electricians cut openings, run wiring, secure junction boxes, and connect each fixture properly. We work cleanly and patch any drywall disruptions as we go.
Once fixtures are in, we install trims, test every light, and configure dimmers to work correctly with your specific LED bulbs. No flicker, no hum.
Find clear answers about service options, scheduling, preparation, and what to expect before you request an estimate.
Q1
In most cases, yes. We use low-profile remodel cans designed for existing ceilings. Attic access makes wiring easier, but we can often fish wires through walls and ceiling cavities when attic access isn't available.
Q2
They do. Standard incandescent dimmers often cause LED lights to flicker or hum. We install dimmers rated for LED loads and match them to your specific fixtures so everything works the way it should.
Q3
It depends on ceiling height, room size, and how you use the space. A general rule is one fixture for every 4 to 6 square feet, but we assess each room individually and factor in natural light and existing fixtures.
Q4
Retrofit LED kits drop into existing housings, making them ideal for upgrades. New construction fixtures are installed before drywall or in remodel situations where we're replacing the full housing. We'll recommend the right approach based on your existing setup.
Q5
Minor lighting work often doesn't require a permit, but adding new circuits or making significant wiring changes typically does. We handle permit research for your specific project and pull any required permits before starting work.
Q6
You can absolutely upgrade individual fixtures. LED retrofits are designed to swap into existing housings one at a time. We can upgrade your whole home or start with a single room, depending on your priorities.
Q7
Yes. We regularly work in Roseville, Rocklin, Folsom, Lincoln, Grass Valley, Nevada City, and El Dorado Hills. If you're in the Placer County region, give us a call and we can confirm service availability.
Q8
Warm white around 2700K works well in living rooms and bedrooms. Kitchens and workspaces often benefit from a cooler 3000K to 4000K range. We can walk you through the options when we assess your space.
Q1
In most cases, yes. We use low-profile remodel cans designed for existing ceilings. Attic access makes wiring easier, but we can often fish wires through walls and ceiling cavities when attic access isn't available.
Q3
It depends on ceiling height, room size, and how you use the space. A general rule is one fixture for every 4 to 6 square feet, but we assess each room individually and factor in natural light and existing fixtures.
Q5
Minor lighting work often doesn't require a permit, but adding new circuits or making significant wiring changes typically does. We handle permit research for your specific project and pull any required permits before starting work.
Q7
Yes. We regularly work in Roseville, Rocklin, Folsom, Lincoln, Grass Valley, Nevada City, and El Dorado Hills. If you're in the Placer County region, give us a call and we can confirm service availability.
Q2
They do. Standard incandescent dimmers often cause LED lights to flicker or hum. We install dimmers rated for LED loads and match them to your specific fixtures so everything works the way it should.
Q4
Retrofit LED kits drop into existing housings, making them ideal for upgrades. New construction fixtures are installed before drywall or in remodel situations where we're replacing the full housing. We'll recommend the right approach based on your existing setup.
Q6
You can absolutely upgrade individual fixtures. LED retrofits are designed to swap into existing housings one at a time. We can upgrade your whole home or start with a single room, depending on your priorities.
Q8
Warm white around 2700K works well in living rooms and bedrooms. Kitchens and workspaces often benefit from a cooler 3000K to 4000K range. We can walk you through the options when we assess your space.
Call King Electric and Solar at (916) 597-0971 or send us a message. We serve Auburn, Roseville, Rocklin, and the surrounding communities.
King Electric and Solar provides residential and commercial electrical services, solar installation, and EV charger setup throughout Auburn, CA and the surrounding Placer County communities. Local work backed by real experience
Services
Service Areas
© 2026 King Electric and Solar. All rights reserved.
