Flickering lights, tripped breakers, or dead outlets can point to bigger problems. King Electric and Solar finds the source fast and fixes it right for Auburn-area homeowners and businesses.
Licensed, insured, and review-backed
8+
Cities Served Across the Region
6
Core Electrical and Solar Services
1
Local Team, No Franchise Dispatch
King Electric and Solar serves Auburn, CA and surrounding Placer County communities with licensed electricians who handle circuit troubleshooting every day. When something in your electrical system stops working or behaves strangely, we trace it back to the actual cause rather than guessing, so the fix actually holds.
From a single dead outlet to circuits that keep tripping, we diagnose and resolve a wide range of electrical issues in homes and commercial spaces.
Identifying circuits that trip repeatedly without obvious cause
Tracing dead outlets and switches back to the fault
Diagnosing flickering or dimming lights on a circuit
Finding overloaded or undersized circuits causing problems
Locating wiring faults, shorts, and loose connections
Testing and evaluating older wiring in Placer County homes
Coordinating panel repairs when a circuit issue runs deeper
Recent customer feedback about circuit troubleshooting services.
They upgraded our main panel and ran circuits for an ev charger, hot water heater and induction cooktop. Very thorough and courteous, communicated well.
Owner reply
Dee Dee, that was a good-sized project and we're glad it went smoothly. Getting the panel upgrade, EV charger, water…
Dee Dee Gunther
2026-06-23
Upgraded batteries for my off grid home. Excellent service and install. Easy to work with and quick to respond to any needs.
Owner reply
Thanks so much Alisa, moving those 800lb batteries was a challenge. We look forward to being your solar provider of the…
Alisa
2026-07-03
Very good nice guys. They just didn't come at the time I had purposely set.
Owner reply
Judy, I am so sorry we were early to the appointment. Hopefully we make it up to you with a free membership and…
Judy Pinegar
2026-07-03
High quality service!
Owner reply
Blake, glad it landed that way. That's what we're going for on every job.
Blake
2026-06-15
Great experience with King Electric and Solar! I had a fantastic experience working with the team at King Electric and Solar. Blake Mitchell** started things off by walking me through the entire project. He took the…
Owner reply
Phil, Thank you so much for your king words. You were a pleasure to work with and we look forward to being your local…
Phillip Sharp
2026-06-03
Amazing service! Super professional, easy to deal with, and the team is really personable and helpful. I called at the end of the day on the Friday before Memorial Day weekend, and JC showed up within literally 10…
Owner reply
Thank you so much Garrett, happy to get you up and running for the long weekend. Call if you ever need an electrician
Garrett Grice
2026-05-29
We follow a methodical approach so nothing gets missed and you understand what we found before any work begins.
We listen to what you've noticed, review the affected area, and check your panel. This gives us a clear starting point before we touch anything.
Using proper testing equipment, we work through the circuit to isolate the fault. Whether it's a wiring issue, a bad connection, or something at the panel, we track it down.
Once we know what's wrong, we explain it in plain terms. You'll know what caused the problem and what it takes to fix it before we proceed.
We complete the repair and test the circuit under normal load conditions to confirm it's functioning correctly before we leave.
Find clear answers about service options, scheduling, preparation, and what to expect before you request an estimate.
Q1
Repeated tripping usually means the circuit is drawing more current than it's rated for, there's a wiring fault, or the breaker itself is failing. An electrician can test each possibility and tell you which one applies to your situation.
Q2
It depends. Occasional tripping from plugging in too many appliances is common. Frequent tripping with normal loads, or a breaker that trips right away, often points to a wiring fault or panel issue that needs attention sooner rather than later.
Q3
Dead outlets are often caused by a tripped GFCI outlet upstream, a loose connection inside the box, or a break in the wiring on that circuit. Some cases are simple fixes; others require tracing the circuit back through the wall.
Q4
Yes. Older homes in Auburn and throughout Placer County sometimes have aluminum wiring or outdated systems that require careful testing. Our electricians are familiar with older residential wiring and know what to look for.
Q5
A straightforward issue, like a tripped GFCI or a loose connection, can be resolved in under an hour. Complex wiring faults in walls or ceilings take longer depending on how the home is wired and where the fault is located.
Q6
Not necessarily. A single failing circuit doesn't always mean the whole panel needs replacing. We'll diagnose the specific issue first. If the panel is the root cause, we'll tell you clearly and explain your options.
Q7
Yes. King Electric and Solar handles circuit troubleshooting in Roseville, Rocklin, Folsom, Lincoln, Grass Valley, and other communities across the region.
Q8
Note which outlets, lights, or appliances are affected and when the problem started. Avoid repeatedly resetting a tripping breaker, especially if it trips back immediately. That information helps us get to the cause faster.
Q1
Repeated tripping usually means the circuit is drawing more current than it's rated for, there's a wiring fault, or the breaker itself is failing. An electrician can test each possibility and tell you which one applies to your situation.
Q3
Dead outlets are often caused by a tripped GFCI outlet upstream, a loose connection inside the box, or a break in the wiring on that circuit. Some cases are simple fixes; others require tracing the circuit back through the wall.
Q5
A straightforward issue, like a tripped GFCI or a loose connection, can be resolved in under an hour. Complex wiring faults in walls or ceilings take longer depending on how the home is wired and where the fault is located.
Q7
Yes. King Electric and Solar handles circuit troubleshooting in Roseville, Rocklin, Folsom, Lincoln, Grass Valley, and other communities across the region.
Q2
It depends. Occasional tripping from plugging in too many appliances is common. Frequent tripping with normal loads, or a breaker that trips right away, often points to a wiring fault or panel issue that needs attention sooner rather than later.
Q4
Yes. Older homes in Auburn and throughout Placer County sometimes have aluminum wiring or outdated systems that require careful testing. Our electricians are familiar with older residential wiring and know what to look for.
Q6
Not necessarily. A single failing circuit doesn't always mean the whole panel needs replacing. We'll diagnose the specific issue first. If the panel is the root cause, we'll tell you clearly and explain your options.
Q8
Note which outlets, lights, or appliances are affected and when the problem started. Avoid repeatedly resetting a tripping breaker, especially if it trips back immediately. That information helps us get to the cause faster.
King Electric and Solar serves Auburn, CA and surrounding areas. Call us at (916) 597-0971 or send a message to schedule your circuit troubleshooting appointment.
King Electric and Solar provides residential and commercial electrical services, solar installation, and EV charger setup throughout Auburn, CA and the surrounding Placer County communities. Local work backed by real experience
Services
Service Areas
© 2026 King Electric and Solar. All rights reserved.
